Tuesday 6 April 2010

Carthage Shield Designs

I've come across some shield design transfers for Numidian and Carthaginian shields. I believe these are by little big man studios and they are for 1/72 miniatures. I'm going to have a go at replicating some of the designs on my 10mm Carthage troops, but not sure how well it will go!!

I've linked the shield transfers below, shame that these are for larger scales as they look pretty nice

Friday 2 April 2010

Some more musings about scale

I've been thinking a bit more about the scale of 10mm wargaming over the past couple of days and I've come across a useful guide on The Miniatures Page website. This compares true scale measurements, wargaming scales and railway model scales, and so is a useful guide in understanding what non-wargames products can be pressed into service without too much bother.

10mm scale corresponds to 1/161 scale, which is almost exactly "n" gauge for model railways, so this means that n-gauge scenery can be used with no problems.

One of the things I've considered buying is more cheap wire trees and I wanted to know how big I could go with their height before it became unrealistic. - The problem with doing research into trees and rivers as a job is that I'm going to be applying an unnecessary level of detail into making sure my rivers and trees are as accurate as they can be!!

The ones I bought from Ebay the other week were 35mm, 38mm and 40mm respectively. These correspond to roughly 4.8m, 6.5m and 8m at scale. Typically this is going to correspond to young trees from the common Beech, Birch, Maple, Chestnut families, and mature Holly, Mountain Ash, Cherry, Hawthorn, and other members of the Rose family. It's worth pointing out that any coloured model trees (which are quite widely available) and represent blossoming fruit trees are going to be a bit large at anything over 50mm tall (10m), as that is about the maximum height.

Typical mature ancient woodland would be best represented by trees that are 75mm (12m), 100mm (16m) and 150mm (24m). These sizes will correspond to typical mature trees of the Beech & Birch families, where they typically have maximum heights in the 15-25m range. Another popular tree model is the willow, where heights are about the 8-20m range depending on sub-species (40-120mm)

For pine type tress you can go a little bit larger, but the advantage of pine trees is that they don't look that different at any life stage, so there is the opportunity for people like me who play at different scales to make a scenery piece that can be used across different games. For maximum heights of Scots Pine & Douglas Fir, you are looking at 35m and 55m respectively, which is 220mm - 340mm!!

The problem with all of these facts is that a lot of wargamers have been raised on a diet of Warhammer with its oddly proportioned buildings and trees. Wargames naturally involve a lot of abstraction and I've no problem with this at all. However being used to the relative sizes of buildings and trees in Warhammer, true scaling in your 10mm games may look a little odd! For example a typical mid-size pine tree in Warhammer at scale would be around 45cm tall, the largest typical examples of Douglas Fir are going to be nearly a metre tall!! But on the table-top you are unlikely to see any trees much taller than 15cm.

For these reasons I am planning to stick to trees no taller than 10cm, as any more, although in scale, will look daft. Hopefully though this will have the advantage that my towering 16m plantations for Warmaster can be pressed into service as 5m tall arboretums for Warhammer as well.

Ultimately although 10mm wargames correspond to n-gauge model railways, you can safely use packs of HO or OO trees with no problem at all and you can even get away with nearly O gauge ones for particularly large trees.

Thursday 1 April 2010

Appropriating Ideas

I came across a section of Old Glory's website for 10mm buildings today and although they are awfully expensive; £30 for 7 unpainted middle eastern building, £50 for a hill fort. It has given me an idea to draw "inspiration" from these pictures in making my own terrain.

I've replicated some of the pictures below to illustrate the great range of products from Old Glory - if anyone from that company feels this is an unacceptable breach of copyright please let me know.

The Buildings show are a middle eastern village (£30), an ancient hill fort (£44), which seems pretty similar to their roman marching camp (and has been presumably painting in cuprinol. And a farm set (£17). There are a variety of things along this theme and a couple of large castles as well (~£90). But for now this will do for a starting point.

I've been thinking of doing a roman marching camp for a long time, but I think I will use 1/2 toothpicks for the palisade. I just feel that the palisade would be made of either wood transported by the baggage train, or cut from the surrounding area. Either way I can't really see them sawing it into planks...

I'm thinking about buying some N-Gauge stone walls from Javis. They are not super cheap, but I think the time to make something similar would not really be worth it. and you can get 6 lengths of wall on e-bay for £4 or something.

Still on the theme of taking inspiration from elsewhere Phil B's Ancient's blog has a great article on making vines (as in wine growing) from pipecleaners and wire, so I'm going to have a go at that as soon as I can find some pipe cleaners. All in all a fair few projects beginning to stack up on my workbench and in my imagination!

It's a shame that I'm doing ancients and not medieval gaming, as otherwise I'd be spending all my money on this pretty modular castle from Kallistra...